So,  Now that we know what kegs sizes we will commonly see, it’s time to talk about how you will actually purchase your beer.  This is how it works in Oregon.  Your state might vary a bit, but everything I’ve heard says that this is the more or less standard (except in Utah.  They can’t get real beer in a keg). Read the rest of this entry »

The tap is what you put on top of the keg to open it and allow the beer to flow out and Co2 to push in.  If you went with one of the counter top units,  this does not apply to you at all since you only have one option and they are all the same.  For the rest of us, there are a huge number of different taps out there leaving you with a question of which one do I want. Read the rest of this entry »

There are a number of different types of kegs.  They basic measurement is a the barrel (abbreviates to bbl).  All breweries that I’ve heard of, always talk in the number of barrels that they can produce in a single batch.   This then gets put into kegs for distribution to us, the drinkers.  There are a huge number  of keg sizes, but these are the ones that you as a kegerator owner will need to care about. Read the rest of this entry »

Now that you’ve decided to get a kegerator,  the first question that always has to be decided is what kind.  Shortly followed up by how much work you want to do.  Kegerators come in numerous styles.   The one at right is a Mini Fridge with a tower on it.

Each kegerator has advantages and disadvantages so follow along for the rundown of each style.  If you think about where you are going to put your kegerator, you may be limited in the choice.  Even if this is the case,  it’s best to know about your options in case the ability to change it ever arises. Read the rest of this entry »

If you have ever thrown a party with beer, then you know about the after party mess. While 24 full cans fit nicely into the case, 24 empty beer cans can cover from here to as far as the eye can see. The solution. A kegerator. Anything from the Heineken Beer Tender up to the full blown kegerator will allow you to avoid the sticky mess that is taking cans back the next day. Read the rest of this entry »

This had to be one of the coolest things I have done in a long time, both litterally and figuratively. It was the mid June and it was starting to be warmer durring the days down here. Nothing like August, but enough that it was noticable.

I started out by running water into the pool from the closest hose. After a few minutes, I cheked one of the other houses and still had a good deal of presure. I ran that hose out to the pool area as well and then a third from another area in the yard. With three hoses running full out, the pressure in the house was significantly decreased. Read the rest of this entry »

Once the concrete was removed it was time to dig down behind the pool. On the bright side, you know exactly how far down you have to dig and any water there was draining out through the leak that had allowed it all to get in making the ground quite dry.

I hadn’t thought to much about it until I started digging and it was the easiest dirt that I had ever dug through. After they dig out the pool are to install it, they back fill with this sand/gravel/dirt mixture that doesn’t stick together like clay. That made it incredibly easy to dig out and reach the enclosure. Read the rest of this entry »

The wheel couldn’t quite reach the deepest sections of the concrete pad, but it got close. Once that was done, I started into concrete removal. The right tool here is a jack hammer. This tool is quite expensive though and I didn’t feel like spending even more money at the renal place. Looking back, I completely under-estimated the strength of the concrete pad. Read the rest of this entry »

Draining a pool is easy. You have a pump that is designed to move water and when set properly, it sends it to drain. Surrounding the pool is a concrete sidwalk. This is pretty standard for many pools and as long as you never want to remove it, isn’t a problem. Read the rest of this entry »

This whole job started with a simple task, replace the light bulb in the pool. I figured this should be simple and dropped into the water. A quick check and there was one flat head screw that seemed like the obvious choice. There were also 12 other screws that concerned me. I considered the possibility that perhaps the single screw held the cover on the enclosure and that the 12 screws held it to the wall.

Read the rest of this entry »